How to Read Utility Locate Paint Marks (Colour Codes Explained)

Utility locate paint colours tell your crew what is buried before anyone digs. Each colour stands for one type of line, and the same code is used by utility owners and private locators across Canada and the US. Once you know it, a road full of paint becomes a map.

Here is what each colour means, how to read the arrows and symbols, and what to do when the marks are unclear.

The colour code

Colour

What is buried

Red

Electric power lines, cables, conduit and lighting cables

Yellow

Gas, oil, steam and petroleum lines

Orange

Communications: telephone, cable TV, fibre, alarm and signal lines

Blue

Water

Green

Sanitary sewer, storm drains and culverts

Purple

Reclaimed water, irrigation and slurry lines

Pink

Temporary survey markings

White

Proposed excavation: where you plan to dig

Two of these are not buried lines. White is marked by the excavator before the locate, to show the dig area. Pink is used by surveyors.

Reading the marks

Lines and dashes. A row of dashes or a line follows the path of the buried utility. The mark shows the centre of the line, not its exact edges.

Arrows. An arrow shows the direction the line runs, often where it turns or leaves the marked area.

H-shaped or parallel marks. Wide facilities, such as a duct bank or a large pipe, may be marked on both edges with a bar between them.

Offsets. When paint can’t go directly over the line, the locator marks it nearby with a distance, for example on a curb or wall. Measure from the offset mark to find the line.

Letters and numbers. Some marks include the owner’s initials, the line size or the depth. Depth is not always given and should never be relied on.

Flags and stakes. On grass, gravel and soft ground, coloured flags or stakes replace paint. They follow the same colour code.

What the marks don’t tell you

  • Exact depth. Lines can be shallower or deeper than expected, and grading changes over time.
  • Exact position. Marks show the approximate location. Always hand dig or hydrovac near every mark, following the utility owner’s instructions.
  • Private lines. BC 1 Call members mark only their own lines. Power to a garage, gas to a heater or irrigation on private property may not be marked at all. Read BC 1 Call vs Private Utility Locating.
  • Lines nobody knew about. Abandoned or undocumented lines can still be in the ground.

A real example

At an intersection on George St in Port Moody, our crew marked blue for water, green for sewer, red for power and orange for telecom, all within a few metres. Each colour tells the excavation crew where to slow down and dig by hand.

When marks are faded or unclear

If you can’t read a mark, don’t guess.

  1. Stop work in that area.
  2. Request a re-mark from BC 1 Call for member lines.
  3. Book a re-locate with your private locator for private lines.
  4. Photograph the marks once they are fresh.

Rain, leaves and traffic wear paint away fast in fall and winter. See Fall and Winter Utility Locates in BC: Rain, Leaves and Faded Marks.

Quick tips for crews

  • Take a photo of every mark before you dig.
  • Mark your dig area in white before the locate.
  • Keep equipment and spoil piles off the marks.
  • Check the marks at the start of every shift.
  • Track your BC 1 Call ticket dates with our free BC 1 Call Reminders.

Frequently asked questions

Who puts the paint marks on my property? Utility owners mark their own lines after a BC 1 Call request. A private locator marks the private lines on your side of the meter or property line.

How long do the marks last? Paint can fade within days in rain or traffic. Your BC 1 Call ticket has its own start window and expiry.

What if two colours cross? That is common. Each line is marked separately. Dig by hand around both.

What does it mean if there’s no paint at all? It may mean no lines were found, or that a member sent a drawing or an all-clear instead of marking. Check your ticket responses before you dig.

Book a private locate

Sigma GPR does private utility locating across Metro Vancouver, the Fraser Valley and the rest of BC, and marks every line with the same colour code your crew already knows.

Book a locate or call (778) 302-0868.

Need a scan?

Send your site address and scope. We usually reply within a couple of hours, Monday to Saturday.

Call (778) 302-0868 Book a Scan