
Harry Jerome Community Recreation Centre, North Vancouver
Scanned the new recreation centre slab at numbered areas before coring. Rebar, anomalies and depths marked, with the slab about 8 inches thick and one layer of rebar.
2605 Sandstone Court, Coquitlam, BC V3E 2T9
Concrete scanning and utility locating in North Vancouver and West Vancouver. Townhome sites, condos and older homes marked on site. Fast quotes.
The North Shore is rebuilding. New condo buildings, townhomes and towers are going up in Lynn Valley, Lynn Creek and Central Lonsdale, while older homes across North and West Vancouver get new services and renovations. Steep lots, tight streets and decades-old lines make every cut and dig a little riskier.
Sigma GPR scans concrete and locates buried utilities across North Vancouver, West Vancouver and up to Squamish with ground penetrating radar and line-tracing equipment. Every finding is marked on site, walked through with your crew and recorded in a written report with photos.
Book a Scan Call (778) 302-0868

Scanned the new recreation centre slab at numbered areas before coring. Rebar, anomalies and depths marked, with the slab about 8 inches thick and one layer of rebar.

Scanned the slab before coring for a store upgrade. Scan grid laid out and findings marked at each core.

Located power, gas, water and storm lines along the street and frontage of a new condo building before excavation. Depths painted beside each line.

Located gas and power lines in the yard of a new townhouse build while the crew dug service trenches.

Located gas, water, telecom and power lines across the road before excavation. Depths painted at each crossing.

Located buried lines across a working yard before excavation. Lines marked between active equipment and traffic.
More jobs: Residential projects · Roads and infrastructure projects
Before you core, cut, drill or anchor into a slab, wall, beam or column. We locate rebar, post-tension cables, conduits and voids, and mark them right on the concrete.
Before you dig, trench or excavate. We find and mark power, gas, water, telecom, storm and sanitary lines, including private lines BC 1 Call members don't mark.
Service connections and frontage work in Lynn Valley, Lynn Creek, Edgemont and Lower Lonsdale.
Coring and anchoring in slabs during new builds, renovations and fit-outs around Lonsdale and Park Royal, including Harry Jerome Community Recreation Centre.
Private lines to garages, heaters and irrigation in homes built decades ago. BC 1 Call vs private locating
Yards and terminals along Burrard Inlet and in Squamish, with live services and equipment all around.
Many North Shore neighbourhoods were built in the 1960s and 70s, so buried lines are often older than any drawing. Rock and steep grades change how deep lines sit. We trace each line, paint approximate depths where the equipment gives a reliable reading, and tell you what we could and could not confirm.
Working across the bridge too? See Vancouver, Burnaby, Surrey and Richmond.
Get a quote
Address, scan or dig area and a few photos. We reply within a couple of hours.
Day, early morning or night shift to suit the site.
Findings marked on the concrete or the ground and walked through with your crew.
Written report with photos for your records.
All of North Vancouver and West Vancouver, including Lonsdale, Lynn Valley, Lynn Creek, Edgemont, Deep Cove, Capilano, Ambleside, Dundarave and the British Properties, plus Squamish and the Sea-to-Sky corridor.
Yes. We locate rebar, post-tension cables and conduits before coring or anchoring, and mark them on the slab with depths where we can. Concrete scanning
Often, yes. BC 1 Call members mark only their own lines. Private lines past the meter or property line are not marked. BC 1 Call vs private utility locating
Often, yes. Older homes on the North Shore tend to have private lines that were never mapped. A private locate before you dig is a small cost next to a cut line.
Yes. We have located buried lines at Squamish Terminals and travel up the Sea-to-Sky corridor for scanning and locating jobs.
In most slabs, walls and footings we see through the full working depth, often about 16 to 20 inches. Very thick mats or two tight layers of rebar can limit what we see below the top layer, and we tell you before we start. How deep can GPR see?
Send the address, the area to scan or dig and a few photos. We usually reply within a couple of hours, Monday to Saturday. Book a Scan
Call us directly or send your site details for a fast quote.
(778) 302-0868 Book a Scan