
Office building, Beckwith Rd
Slab about 12 inches thick with two layers of rebar. Top and bottom bars, conduits and safe core spots marked with depths.
2605 Sandstone Court, Coquitlam, BC V3E 2T9
GPR concrete scanning in Richmond before you core, cut or anchor. Warehouse floors, office slabs and walls marked on site. Fast quotes.
Richmond has the second-largest industrial area in Metro Vancouver, plus busy supermarkets, office buildings and new towers in City Centre. Every racking anchor, store upgrade and office fit-out means drilling into slabs and walls full of rebar, conduits and drain lines.
Sigma GPR does GPR concrete scanning across Richmond before you core, cut, drill or anchor. We mark rebar, post-tension cables, conduits and voids right on the concrete, note slab thickness and depths where we can, and send a written report with photos.
Book a Scan Call (778) 302-0868

Slab about 12 inches thick with two layers of rebar. Top and bottom bars, conduits and safe core spots marked with depths.

Scanned the floor around the counters in an open supermarket. Findings and depths marked so work could go ahead.

Scanned the warehouse floor at numbered spots between the racks before drilling. Each area gridded in chalk.

Scanned concrete walls before new openings. Rebar layout marked at each numbered scan area.
More jobs: Commercial and institutional projects · Industrial projects · All our Richmond services
Racking anchors and equipment in Riverside, Crestwood and along Hammersmith Way and Sweden Way.
Store upgrades, new counters and drains, often while the store stays open.
Fit-outs where cores and anchors go through thick slabs with two layers of rebar.
Coring in post-tensioned floors near No. 3 Road and Capstan. Why PT slabs need a scan
We also do private utility locating across Richmond, from YVR and Iona Island to plaza parking lots on Garden City Rd. One crew can scan the slab inside and mark the buried lines outside before you dig.
Utility locating in Richmond
Address, scope and a few photos. We reply within a couple of hours.
Day, early morning or night shift to suit the site.
Results marked on the concrete and walked through with your crew.
Written report with photos for your records.
All of Richmond, including City Centre, Brighouse, Capstan, Steveston, Ironwood, Bridgeport, the Riverside and Crestwood industrial areas, Sea Island and Iona Island, plus Delta, Vancouver and Burnaby.
Yes. We scan each spot between the racks, mark rebar, mesh and conduits, and grid the area so the installer knows where to drill.
Often, yes. On thicker slabs we mark the top and bottom layers separately and note approximate depths, as we did on a 12-inch office slab on Beckwith Rd.
Yes. We have scanned inside an open supermarket in Richmond and work early mornings and night shifts when needed.
Send the site address, scope and a few photos. We usually reply within a couple of hours, Monday to Saturday. Book a Scan
The number of locations, the total area, site access and whether you need a written report. What affects the cost of a concrete scan
Call us directly or send your site details for a fast quote.
(778) 302-0868 Book a Scan